A rotary joint that transfers pressurized working fluid into a rotating machine part into a rotating machine component, has a housing belonging to the stationary machine parts, a shaft that matches the rotating machine parts, at least A bushing mounted in the housing, the bushing sealingly housing a...

There is a hole on the trench and is co ected to the corresponding lines on the rotating base by disposed outside the sleeve. The mandrel is mounted in the sleeve through a dual-bearing, and the sleeve is co ected to the rotating base by bolts, and the O-ring seal is used at the co ection. The rotar...

In particular, plastics that are desired to be made relatively easy to mold, for example, molded, for example, in an injection molding process, can be used to prepare a material of the rotary joint sleeve element. It is also conceivable to use other materials such as rubber. It is possible to keep t...

The rotary joint rotating member, fixing member, fixed ring, and plug, the rotating member is dynamically sealed with a solid part, and the rotary joint is provided with a dynamic guide cha el and a dynamic guide passage, and is independent of the axial parallel. The passage is co ected to the radia...

The housing is provided with an a ular air path and a ventilated hole corresponding to the radial segment, and there are special leaks. Safety measures to prevent combustible gases from accidentally leaking and even explode. Pneumatic rotary joint, using a balanced sealing structure, so that the pre...

Stainless steel transition joint D type: It is a female head with a pull lug on each side. One end of the co ection is immediately co ected by pulling the ear clip, which is convenient and convenient to disassemble, and the other end is threaded. Also known as the female end i er wire direct stainle...