A rotary joint that transfers pressurized working fluid into a rotating machine part into a rotating machine component, has a housing belonging to the stationary machine parts, a shaft that matches the rotating machine parts, at least A bushing mounted in the housing, the bushing sealingly housing and sealingly mounted within the housing, which can be radially elastically movable.

The inner surface of the bushing and the reference mask of the shaft has a relatively sliding sealing surface, and the rotary joint bushing is connected to the radial hole of the at least one axis by ring through the ring groove on the inner surface of the bushing.

The hole in order to pass through the bushing into a fluid guide in which the pressurized workpiece fluid extends into an axial direction, and the guide groove is connected to the radial hole of the shaft. The rotary joint granulator and the feed method are combined with the side feed and the center feed,Flare Fitting and the feed assembly is connected to the side feed, and the rotary joint and the granulated nozzle are in communication.

The center feed, the granulator includes granulation mechanism, transmission mechanism, granulating head, between the rotary joint between the transmission and the granulating head, the feed port of the feed assembly and the feed port of the rotary joint side .

Advantages: First, the design of the side feed hole feed structure and the central pore feed structure, avoiding the shortcomings of the central feed in the background technology, solving the problem of side feed overflow; the second is that the granulation is good, from now The granulation has a diameter of about 2mm or so, so that the quality of the product has a quality leap; the third is the unique, simple, and its working performance is stable and reliable.  

امتیاز بدهید :

There is a hole on the trench and is connected to the corresponding lines on the rotating base by disposed outside the sleeve. The mandrel is mounted in the sleeve through a dual-bearing, and the sleeve is connected to the rotating base by bolts, and the O-ring seal is used at the connection.

The rotary joint is characterized in that the number of inputs is at least two, and at least two inputs are axially distributed along the axis of rotation, and each of the inputs is formed between the rotating shaft, and the transport hole and the output aperture. The quantity corresponds to the number of inputs, each conveying hole connects an annular channel and output aperture of an input.

The fiber rotary joints typically have a rotor, mounted for rotational motion around the axis relative to the stator. The fibers are in communication with the rotor OEM Brass Hose Connector manufacturer and the stator, respectively. The optical signal is suitable for transmitting the interface between the rotor and the stator is transmitted in any direction in both directions; means respectively, from the rotor to the stator, vice versa.

There is a large number of applications, requiring traffic on the transmission side of the rotating connector rotation interface, a data stream transported in a fiber, by spanning the collimated lens, the highest signal strength and the smallest change in the signal strength, The rotary joint rotor and all relative angular positions between the stator are transmitted.

The data stream thus transmitted can be introduced to another optical fiber on the receiving side of the interface in another collimation lens. In some applications, the fibers on the transmitting side of the fiber rotary joint interface are not mapped to a specific optical fiber on the receiving side. 

امتیاز بدهید :

In particular, plastics that are desired to be made relatively easy to mold, for example, molded, for example, in an injection molding process, can be used to prepare a material of the rotary joint sleeve element. It is also conceivable to use other materials such as rubber.

It is possible to keep the seat cushion by at least one rotary joint. Specifically, the seat cushion of the rear semi-seat seat of the motor vehicle can be entered in the vertical position by such a rotary joint to increase the storage space or storage capacity inside the vehicle. For this purpose, the lower end of the seat is typically attached to the backrest of the seat or the vehicle body portion of the vehicle by at least one rotary joint.

At the same time,OEM thread connector avoid the annoying noise or vibration in the rotary joint, or prevent accidental movement of folded or raised seat cushions. The positionable rotary joint rotating body forms a cavity between the main junction tube, and the cavity is sealed with an end cover, and the left segment and the right segment are disposed between the cavity.

Thus, the wall is also opened on the wall of the rotary joint rotating body, respectively, the corresponding position corresponding to the sub-spray tube, the main feed tube, the sub-tube, and the position of the side spray tube on the main joint pipe of the rotary joint The opening, the main joint pipe is opened to the main feed tube, the sub-tubular tube, respectively, open the main feed tube, the sub-tissue, and the recovery chamber.

In summary, due to the above technical solution, the beneficial effect of the positionable rotary joint is: 360 degrees to rotate, and can be positioned; multi-channel design, compact structure, manufacturing and installation are very convenient. 

امتیاز بدهید :

The rotary joint rotating member, fixing member, fixed ring, and plug, the rotating member is dynamically sealed with a solid part, and the rotary joint is provided with a dynamic guide channel and a dynamic guide passage, and is independent of the axial parallel.

The passage is connected to the radial side of the dynamic side channel and the dynamic side channel, and the dynamic side channel and the dynamic side passage of the rotary joint are separated from a static flow channel disposed on the fixing member, a static guiding channel connection, a static guide passage of the rotary joint.It is stationary.

The sealing loop is disposed between the outer side and the outer side of the flow guide channel; the retaining loop groove is disposed at the end of the rotary joint rotation portion, the holding ring is mounted in the retaining loop slot, and is determined by the snap ring restriction.Basic principle: The component must be carefully checked before the rotary joint assembly, Thread Joint including checking the defects and dimensional accuracy of the rotary joint. The assembly needs to avoid the functional effects of assembling an impact.Cleaning parts before assembly of rotary joints and fill the desired lubricants (fat).

The rotary joint and the precision bearing device are not vibrated in the high rigid axis, and the stiffness is increased by special heat treatment, and the fixed ring is made of special material, and the wear-resistant carbon graphite manufacturing, anti-seepage and dry operation, especially The closed surface size of the rotary joint must be reduced to a minimum, even under a higher pressure, our long-term mechanical experience has become a good balance result in the cover of the rotary joint, and the combination of bronze fixed ring is used for high pressure. 

امتیاز بدهید :

The housing is provided with an annular air path and a ventilated hole corresponding to the radial segment, and there are special leaks. Safety measures to prevent combustible gases from accidentally leaking and even explode. Pneumatic rotary joint, using a balanced sealing structure, so that the pressure generated at both ends of the seal ring is almost equal, thereby effectively reduces the wear of the sealing load on the sealing surface, the speed is fast, and the stability is strong, and the service life is extended.

Pneumatic rotary joint working medium: water, hydraulic oil,thread connector factory coolant, vacuum, compressed gas, etc. Mainly used for printing, paper, textile, metallurgy, etc. Cooling system gas rotary joints working principle pneumatic rotary joint by multi-passage with one-to-one gas path structure, and simultaneously rotate the air, vacuum and other gas sources simultaneously. In terms of pneumatic slip ring, whether it is currently the current path, its working principle is the same.

This is what we must know. Some people say that 1 road and 16 roads are separate. Today we know. There is no need to make these problems. Their principle is the same because they do not interfere with each other when rotating, so this is also a manifestation of its advanced technology.

Of course, this also guarantees the normal operation of the equipment process. Now we may know how it works, it is actually very simple, but we can't ignore its power because of it, now it is indispensable in many devices. Otherwise, our technicians will not do their best to design and develop more convenient pneumatic rotary joint equipment components in this area. 

امتیاز بدهید :

Stainless steel transition joint D type: It is a female head with a pull lug on each side. One end of the connection is immediately connected by pulling the ear clip, which is convenient and convenient to disassemble, and the other end is threaded. Also known as the female end inner wire direct stainless steel transition joint, also known as the female

inner wire direct quick-fit joint, one side is connected to the male head, and the other side is a threaded socket. Stainless steel transition joint E type: it is a male leather pipe joint, a tap water pipe joint at the male end, and a male pagoda. One is connected to the female head, and the other is connected to the plastic hose.

Stainless steel transition joint F type: it is a stainless steel transition joint with male end outer wire, male head outer wire stainless steel transition joint, one side is male, one side is inch thread, OEM Hydraulic Pipe Fitting factory F type can also be combined with flange for electric welding applications, namely F Type flanged stainless steel transition joints are also particularly versatile.

Stainless steel transition joint DC type: It is a female end rapid pipe joint, that is, a female rapid tube body, also called a support rod type rapid pipe joint, and the female end is sealed with a cover. Stainless steel transition joint DP type: It is a male quick fitting, also called a quick fitting pipe joint, and a male quick fitting, also called a male end sealing cover.

All in all, there are eight types of stainless steel transition joints: A type B type C type D type E type F type DC type DP type. During the period, there are 4 male heads for A type, E type, F type and DP type and 4 female heads for B type, C type, D type and DC type. If there is a bottle cap, the female end is the female end; if there is no bottle cap, the male end is the male end. Generally, it is a male and a female supporting facility application.

امتیاز بدهید :